Irrigation
From broken heads to new systems.
Full service sprinkler repairs, maintenance and installation. Serving Pinellas County and beyond.
Repair and diagnostics
Broken heads, cut lateral lines, stuck valves, controllers nobody has reprogrammed since the house sold. Every zone gets run, and you hear what each repair costs before the technician starts.
What a repair visit involves
A technician runs every zone from the controller and walks the property while it's running. That's how you find the problems that don't announce themselves: a head buried under three years of St. Augustine runners, a nozzle throwing onto the sidewalk, a valve weeping into the same low spot every night.
Common calls:
- Zone won't come on, or won't shut off
- Broken or sunken heads, misaligned arcs, overspray onto hardscape
- Cut lateral lines after landscaping, fencing or cable work
- Solenoid and valve failures, wiring faults, corroded splices
- Controllers nobody's touched since the house changed hands
- Rain sensors that stopped working years ago and nobody noticed
- Backflow preventer leaks and replacements
"I had major problems. Three circuits were off line and system was running at odd hours. Spencer came out on Monday and fixed everything in an hour and 15 minutes. Also cleaned up and reburied the valves so no mess to clean up."
Jim D. · LargoEfficiency check-ups
A high water bill but nothing's obviously broken. The controller might need to be checked, heads might need to be adjusted and nozzles inspected.
How we check it
An experienced technician will check all of the zones for inefficiencies and leaks. They will check your timer settings to make sure it's running on an optimal setting for maximum efficiency. Heads will get checked for overspray across driveways or sidewalks and clogged nozzles. The technician will identify necessary repairs and make professional recommendations to save water and improve the health of your landscape.
Smart controllers
The ultimate in watering efficiency, a smart controller adjusts watering based on local weather conditions, not just the calendar. It skips a cycle after rain, automatically adjusts run times when the season changes and can be reprogrammed remotely when the watering rules change.
What a smart controller changes
Traditional timers require manual programming tied to a fixed schedule. They run the program regardless of weather conditions. Whether or not it rained overnight the night before or if the ground is already saturated. A smart controller adapts the programming based on local weather conditions. Less watering when it's cool and rainy, more when it's hot and dry. Optimized efficiency to maximize landscape health and save on watering bills.
Regardless of the brand, our experienced technicians are trained to operate most models of smart controllers. By providing us with remote access most programming changes can be made for free FREE without a site visit. As part of every maintenance plan visit the controller settings are verified..
Recurring maintenance
Regularly scheduled visits, full inspections and routine adjustments to keep your system operating reliably. Labor included.
Why regular visits
Sprinkler systems have a lot of mechanical parts. Dozens of heads, hundreds of feet of dripline, electromechanical valves, wiring, pipes, timers, and more. There's a lot that can go wrong. A small leak or stuck valve can waste a lot of water, leaving you with a high water bill. Bad wiring can prevent the system from turning on, resulting in brown grass and dying plants. Our skilled technicians are trained to handle it all.
We'll identify and correct minor issues before they become big ones. Four visits a year, up to six zones, up to an hour of labor each time, priority scheduling when something does go wrong, and no visit fee on any call-out for as long as you are enrolled. $50 a month, or $550 for the year.
Design and installation
New irrigation systems designed and installed to meet the specific requirements of your landscaping. Optimized for efficiency and plant health. Free estimates.
Our installation process
Understanding your unique requirements is our first priority. An experienced project manager will meet with you, walk the property and discuss your landscaping plan in detail. We'll discuss options for water sources, backflow prevention, equipment selection, smart controllers, planning and permitting and other site specific considerations. We can work closely with your landscaper to ensure a smooth and streamlined process.
At the time of installation we'll go over it all with you again before we get started. The zones will be laid out for optimal coverage. Heads will be spaced properly and pipes will be run to beds for drip and micro. The controller will get mounted and programmed, ready for landscaping. If inspections are needed for the water hookup, we'll coordinate that, too.
Reclaimed water
Clean wastewater gets a second life as a low-cost alternative for landscape irrigation. It's the most effective water source to reduce reliance on our natural resources.
More about reclaimed water
Reclaimed is cheaper per gallon and, in normal conditions, less restricted than potable drinking water. It also may operate at different pressure and have different filtration requirements. Systems built for it has strict installation requirements, need appropriate filtration and a controller programmed for a different watering schedule rather than the potable one.
"These guys are pros, and did a great job way faster than I thought possible. By using reclaimed water and having a controller that's hooked in to local weather reports, the irrigation system will save its cost in a couple of years."
Steve Speidel · Tampa BayPrivate wells
Reduce your utility bill. With a well on your property you don't use treated municipal water on your lawn.
How does a well work?
With a shallow well, vertical well points are bored into the underground water bearing soil and then connected to a pump on the surface. An irrigations system hooked up to a well doesn't use utility supplied, eliminating irrigation from your water bill.
Keep in mind that wells still draw from groundwater resources. Because we all draw from the same "pool" a well is still subject to watering restrictions.
Members don't pay a visit fee
Four visits a year, up to an hour of labor each, priority when something breaks, and no fee on any call-out. $50 a month. Enroll in our maintenance plan
Service area
St. Petersburg, Largo, Seminole, Pinellas Park, Kenneth City, Gulfport, South Pasadena, Treasure Island, St. Pete Beach, Madeira Beach, Clearwater and surrounding Pinellas County.
Financing
Larger installations and drainage work can be financed through Wisetack. Checking your rate doesn't affect your credit score.
Questions we get a lot
Do you work on systems you didn't install?
Most of our work is on systems somebody else put in, often decades ago. We'll work on whatever's there.
How much does a repair cost?
It depends entirely on what failed. A head replacement and a main line break are not the same job. You'll hear the price before work starts, and we'll show you the failed part.
Should I replace my system or repair it?
Repair, unless the piping itself is failing in multiple places or the layout was wrong to begin with. A system with bad coverage can usually be re-zoned and re-nozzled for a fraction of a replacement.
Is a smart controller worth it?
On most properties it pays for itself, because the biggest source of waste is watering on a fixed schedule through a wet week. It's less compelling if someone at the house is already adjusting the controller by hand every month.
Do I need a permit?
For repairs, no. For new installations it depends on the municipality and whether a backflow assembly or water service connection is involved. We handle it.